Part # 4600-2506
Manufacturer Code 262506
Dimensions 10" x 6-1/2"
Pentair valve with 6-1/2" flange used on the following sand filters:
Generic Valve -PL0700
How do I bleed air with a Tagelus multiport valve?
Reply
Tagelus multiport valves before 1993 did not have an air bleeder valve and had to self-purge the air through the return lines. If your valve is 1993 or after, there is an air bleeder valve towards the bottom of the valve next to the lower port - about the size of a quarter. Turn knob counter-clockwise to release air.
Reply
Does this valve fit in a PAC-FAB Model TA 35D?? Can I have access to a diagram??
Reply
Herman, Yes, the 4600-2506 is one of several valves that will fit. We do have a Pentair Tagelus Parts Page.
Reply
I have a Tagelus-Dynamo model TA40 Will this modle fit mine It's a 24 round
Reply
You will need to look at the Tagelus Valve Options at the Top of This Page. First you will need to determine if your valve is clamp on or screw on, if it is clamp on then your choice would be this valve. If you have a screw on valve you would then need to determine if your filter is from prior to Nov. 1991 or after Nov. 1991. You can also determine this based on if you have V Threads on the Valve or Buttress Threads on the valve.
Reply
looking for tangelus deluxe sand filterfiberglass part number 272526 complete valve assembly 1/12 pipe serial 05180881001605 size e different part no. now I guess
Reply
Hi Joh, this would be the correct replacement valve for the 272526 valve assembly on a Tagelus Deluxe sand filter.
Reply
Less than 1 hr
Screwdriver, Nut Drivers
1 0
Removed all pipes from old valve. Removed old valve. Pre fitted new valve for correct positioning. Secured valve with split ring. Removed old thread tape. Applied new thread tape. Installed piping to new valve. Installed gauge using thread tape. Checked pipes. Stated pump. Checked for leaks
Less than 1 hr
Screwdriver, Pliers
2 2
Removed clamp that holds valve in place. Wiggle it until old valve came free. Lubed all connecting fittings and o-ring on new valve, positioned the valve, and pushed firmly into place.
You can tell when you have valve in place because the clamp will not fit until you have new valve positioned properly. Tighten clamp with screws provided making sure you get nuts in recess on clamp. Reconnected the plumbing with unions removed from the old valve. Open vent turn pump on and close vent. Check for leaks. Job is now complete..
1 to 2 hrs
Screwdriver, Pliers
0 3
-LG.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2\", 272526 - 262506")
-LG.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2\", 272526 - 262506")
-LG.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=45&width=45&mode=pad "Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2\", 272526 - 262506")
-LG.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=45&width=45&mode=pad "Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2\", 272526 - 262506")
The Most Recent Reviews
(5 out of 5 stars) Just Like the Old One
Reviewed By: Inyo Customer ()
Just like the old one which is over 20 years old
Was this review helpful to you?
1 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect! It came quickly.
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
PERFECT FIT A+ FAST SHIP
Was this review helpful to you?
1 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Best investment! Perfect fit
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect Fit
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great service, parts works as advertised
Was this review helpful to you?
1 1
(5 out of 5 stars) Great replacement
Reviewed By: Steven A. from Raleigh, NC ()
Pros: Good price, solid replacement, all hardware included
Cons: No
Our original 6-position Valve was over 15 years old and getting a bit tired. This replacement was a direct drop-in replacement and came with the 2-piece collar, hardware, sight glass and pressure gauge. The new valve instantly got us +4 PSI pressure, so we know that air was getting into the system through the original somewhere. For $125, it was worth getting new.
Was this review helpful to you?
0 1
(5 out of 5 stars) Great products
Reviewed By: James M. from Mountain Grove, MO ()
Pros: Fast shipping
Cons: none
Great product and shipping was fast. We received it prior to estimated time. Just what we needed to get our pool up and running. Comes with everything you need for installation.
Was this review helpful to you?
0 1
(5 out of 5 stars) Great top mount valve
Reviewed By: Patrick F. from Killeen Texas ()
Pros: Ease of use
Cons: internal parts wear quickly
Excellent and cost efficient product. Easy to install and works great
Was this review helpful to you?
1 0
(5 out of 5 stars) no problems
Reviewed By: Mgm1 from hooper ut ()
part arrived intact works great but not pool problem still have sand on bottom UGH
Was this review helpful to you?
0 1
(5 out of 5 stars) Easy installation
Reviewed By: Joan from KS ()
Pros: Fast
Cons: NA
Was easy to replace the valve, product arrived on time. Chatting with customer service helped to get the correct replacement parts for a pool pump that is over 15 years old. Will use them again.
Was this review helpful to you?
0 1
(4 out of 5 stars) Top Mount Valve
Reviewed By: Rob 1 ()
Pros: Installed in 5 minnutes.
Part was very easy to install. Came with all parts needed.
Was this review helpful to you?
0 1
(5 out of 5 stars) replacement valve
Reviewed By: toolman1 from N.C. ()
Pros: Great prices and easy to navigate website
Cons: none
Great website. Easy to navigate and they have exploded views so you can find the exact parts required.
Was this review helpful to you?
1 1
(5 out of 5 stars) Great valve
Reviewed By: JERRY A. from Crowley, TX. ()
I bought this as a replacement for my old one which was 15 yrs. old and man it works great.
Was this review helpful to you?
2 1
(5 out of 5 stars)
Reviewed By: Dustin M. from Olathe, KS ()
When looking for a replacement valve for my filter I wasn't sure what all I needed as far as gaskets etc. Inyo Pools offered a packaged set that gave me all I needed. The old came off, then new went on with no troubles or leaks.
Was this review helpful to you?
6 2
(5 out of 5 stars) Perfect replacement for my old cracked top valve
Reviewed By: Gary H. from Pocahontas, IL ()
Pros: Everything fit, worked fine.
I was in need of a replacement valve for my Pentair Tagelus TA60D filter that was split or cracked on one port. Ordered from INYO Pools.com and the valve performed just like the original, perfect replacement. Was surprised that the valve included pressure gage and O ring installed.
Was this review helpful to you?
0 1
(5 out of 5 stars) Replacement Valve
Reviewed By: Adam from Haughton, LA ()
Just like the old one
Was this review helpful to you?