By Custom Molded Products
Part # 3260-23
Manufacturer Code 10-112-00
Dimensions 1.65" L x 1.65" W x 0.15" D
Universal Wall Fitting Restrictor Disk by CMP for Polaris Cleaners - 10-112-00
Where does the red restrictor go and is it necessary if the blue one is in place on the hose end?
Reply
Hello Kirk- Here is what the owner's manual for polaris mentions about the UWF restrictors: Adjusting the wheel RPM: If count is less than 30 RPM: • If an adjustable valve is installed on the cleaner line, open it completely so water can flow freely to the Polaris®. • Check the filter screen in the in-line filter for debris that restricts water flow. • Clean the skimmer, filter and pump basket, clearing debris that restricts water flow. • Check the hoses, connections and swivels for leaks that cause loss of water pressure. • Remove the blue restrictor disk from the UWF. If count is more than 36 RPM: • Replace the blue restrictor disk in the UWF with the red restrictor. If the flow is still too high, unscrew the pressure relief valve until the proper RPM is reached. Note: The pressure relief valve should only be adjusted when a restrictor is installed. • If an adjustable valve is installed on the cleaner line, adjust it t.
Reply
When the pump for my Polaris is off, the Polaris still walks slowly in the pool while the pool pump is on. Is this normal? Do I need to install the flow restrictor?
Reply
Hello, This would not be normal. it would not be an issue for it to keep going though.
Reply
