Part # 5270-64
Manufacturer Code 629002-001
Dimensions 2" D x 2-1/2" L x 1-3/8"H
Stationary switch used on A.O. Smith single speed pump motors. Replaces 627953 switch among others (see alternate part numbers above).
I have an AO Smith motor with a broken switch. Model nbr C48K2N143C1C. Number on the broken part is 627953. Will your part work?
Reply
Yes this is the proper replacement switch for the AO Smith 627953 switch.
Reply
I have a 1 horsepower hayward super pool pump with an a.o. smith motor. I broke this plastic part while replacing a seal in the pump. I believe this is the part I need. Is this part used on a Hayward 1 horsepower super pump?
Reply
Hayward has used a few different motors on there 1 HP Super Pump over the years, however this switch does work on many motors including most of which were used on the 1 HP Super Pump. I would double check your measurements of your switch vs. the measurements we have here 2"DIA X 1-1/4" OVAL X 3-1/8"H and if they match up than I would feel relatively confident this part would work for you.
Reply
I accidentally broke this part on the back of my motor and now it will not work. If I replace this saw-25 will that take care of my motor issue?
Reply
Yes, if this switch has broken then that very well could be the reason that you motor is not working any longer. Replace then test.
Reply
Have a 1.5hp ao smith motor that hums when turned on when i hit the backof it with a board it will kick on will this solve my problem
Reply
Hi Matt, Usually a humming motor is due to a capacitor going bad. Here is a guide showing you How to Select the Correct Capacitor For Your Pool Motor which may be of help.
Reply
