1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. Polaris Booster Pump PB4-60 (1994-2011)
  5. 6558-0

$23.79

Qty:
 ADD TO CART

Details

Top

Part # 6558-0

Manufacturer Code 80050

Alternate Part #'s 66B, 66BR, 80050, 88-125-1000, PTX80050, SDA31520

Product Description

SILICONE, CLEAR RTV 3 OZ.

General-purpose, clear RTV indoor/ outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. May be applied to horizontal or vertical surfaces. Permatex® Clear RTV Silicone Adhesive Sealant is waterproof and flexible. Temperature range -75°F to 400°F (-59°C to 204°C); resists water, weather, and vibration.

Top
Ask A Question

?     Asked on 9/17/2014by Guest

I was told to use silicone on my spider gasket. Is this silicone 66br what I need to use?
 Reply

A  Answered on 9/17/2014 by InyoPools Product Specialist Patrick P.

Yes, this is one type of rtv silicone that you can use on the under side of spider gaskets to help hold it in place.
 Reply


?     Asked on 5/24/2021by Douglas E. Roberts

Should this glue be applied to the entire underside of a spider gasket, or is it only necessary to apply in a few key spots?
 Reply

A  Answered on 5/24/2021 by InyoPools Product Specialist Craig C.

Hello Doug.  When replacing a spider gasket it is typically not necessary to apply glue or silicone to the entire underside of the gasket.  Apply the silicone in key areas such as at the junction of every spoke and in the middle of every spoke junction on the outer ring's circumference.  Clean the diverter face to remove any leftover spider gasket remnant and/or rough spot.  Lubricate the diverter face and spider gasket prior to reassembly.  
 Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench

0     2

Replace torn Multi-Valve spyder gasket

Written on 6/9/2022 by Guest

1) Remove top of diverter valve.
2) Remove spyder gasket. This proved to be very tedious and time consuming since factory had glued entire gasket seat onto the valve head.
3) After making sure all of prior gasket and adhesive was removed, strategically glue and reinsert new gasket. Apply silicone lubricant to gasket.
4) Replace all additional parts to be replaced. Handle washer, spring, spring washer, 2 O-rings.
5) Reattach valve head.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Socket Set, Wrench Set

Leaking pump

Written on 5/19/2022 by Guest

I followed the step by step directions in the video and fixed it myself saving hundreds of dollars!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
(0%) 0 of 2 customer would recommend this product to a friend.
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review

The Most Helpful Review

3     0

 (5 out of 5 stars)  This was the recommended adhesive by Inyo and it works

Reviewed By:  Gary B. ()

Needed the silicone glue to attach a spider gasket to a replacement diverter-just follow directions, clean the groove, apply the glue, press in the new gasket and wait 24 hours for the glue to cure completely Re-assembled the diverter and ran the pump--all is good.


Was this review helpful to you? 
 

The Most Recent Reviews

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

Perfect service from inyopools.com


Was this review helpful to you?