Part # 5057-30
Manufacturer Code 37400-0028S
Dimensions 1.31" L x 1.38" W x 1.38" D
US Seal PS-3868 Pump Shaft Seal, 3/4", for Sta-Rite 37400-0028S
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only
How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
I am replacing a pump motor and seal on a Sta-rite pump labeled P2RA5E-1241......The 1241 suffix isa little fuzzy with only 24 being clear. What seal should I order?
Reply
Jerry,A prefix of P2RA will cross reference to the Dura-glas pump. The mfg made changes to the pump around 1998, so there are two different seals depending if you purchased your pump before 1998 or after 1998. You can view both on the parts breakdown.
Reply
my pump model is a sta rite self priming pump P6E6E-206L - WHAT SHAFT SEAL DO I NEED?
Reply
Hi David, The OEM Shaft Seal (37400-0028S) is the correct shaft seal for the Sta-Rite P6E6E-206L Pump.
Reply
My pump calls for the Seal part #37400-0028 instead of the seal #37400-0028S.
What is the difference between the part number with the "S" or without?
Thanks
Reply
They are the same part. There is no difference.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set, Adjustable Wrench, pipe wrench
shut the power to the pump and disassembled the pump according to the on-line video. This is the second time I have had to replace the shaft seal. The first time I replaced the seal I used an aftermarket product.. I strongly recommend using OEM shaft seals.
The Most Recent Reviews
(5 out of 5 stars) Great Shaft Seal
Reviewed By: Edward B. from Corona, Az ()
Pros: Right part, right price at the right time.
Cons: None
Quick, accurate and efficient.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Justin P. ()
Pros: all good
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Hank from Avon, NC ()
Pros: Easy to install.
Cons: None that I found.
Both parts of the old seal assembly were very easy to remove. The new seal went in with the same ease. Seal worked perfectly when pump was first started after installation.
Was this review helpful to you?
(5 out of 5 stars) Easy to install
Reviewed By: Hank from Avon, NC ()
Pros: Very easy seal to install
Cons: None that I can think of
Went to the pump manufacters web site to identify the proper seal. Followed installation instructions from the website. Quick and easy
Was this review helpful to you?