$34.10
Part # 3288-045
Manufacturer Code A4400PK
Dimensions 2.35" L x 2.35" W x 1.2" D
Propeller - 4400
how do you change the propeller 4400
Reply
Hi, Richard. Depending on the cleaner you have, you will remove the outlet cover by undoing the screws. Then pull the propeller off the pump shaft and press the new propeller on.
Reply
what propeller will fit an aquabot turbo classic since the 4400 propeller has been discontinued?
Reply
Hello Jeffery. Changes to US based Aquaproducts and Israeli based Aquatron have resulted in some confusion in the industry. Currently, the best course of action is to contact Zodiac/Aquabot at phone 1-862-269-9269, extension 3169 for assistance.
Reply
Less than 1 hr
Screwdriver
3 0
I pulled the unit from the water found that the impellers were dry rotted and snapped off order new impeller. I removed the 3 screws on the impeller cover inserted a small stew driver and applied light pressure up on the remainder of the broken pc. Installed new impeller and replaced cage back over the impeller with the 3 screws tested the unit in the shallow end of the pool unit climb the walls as it should.
