Part # 5110-13E
Manufacturer Code SPX3020E
Dimensions 9" L x 9.5" W x 2" D
This is an After-Market Seal Plate by Pureline, Compatible with the Hayward® Super II Pump™ Seal Plate - SPX3020E and SPX3000E (For 3000 Series impellers)
The original style Hayward Part Number SPX3000E was discontinued and replaced by the newer-style Hayward Part number SPX3020E.
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
i have 3 very small pissing stream of water coming from the top of my pool motor where it meets the pump is there a seal or gasket that goes there?
Reply
Will this fit a hayward rs1000 1hp pump?
Reply
Yes, This seal plate ( SPX3020E ) or 5110-13E will fit on 1/2 - 2 1/2 Hayward Super II It is part 10 on the parts explosion.
Reply
Our Hayward Super pump II was leaking so I ordered a seal kit from you folks. when I got into the pump I find the old ceramic seal is broken and looks like it had been spinning in the seal plate! Melted the heck out of the shoulder.
The diffuser has SP3000-BN on it. The seal plate has no number but looks like the illustration. Just want to make sure I'm ordering the right one. Thanks Ed
Reply
Hi Ed, The Hayward Seal Plate (SPX3020E) would be the correct seal plate that can be used with Diffuser p/n SP3000-BN for your Hayward Pump.
Reply
I have a Hayward RS1000 and it is leaking at the top of the seal plate. In addition to replacing the seal plate, do I also need to replace any gaskets in that area?
Reply
my housing is a sp3020e and the seal I ordered is too large, cerramic
Reply
If you have the Hayward Super 2 pump, the correct replacement seal is the SHAFT SEAL 201 (GENERIC) - AS-1521 or the manufacturer's version the HAYWARD SHAFT SEAL (OEM) - SPX1600Z2.
Reply
Less than 1 hr
Screwdriver, Socket Set
Disconnect the motor from the pump housing, remove the old seal plate and put everything back together. It helps to make a photo of your disassembly so that you simply put everything back together in reverse. The Inyo diagrams and videos make it easy. You can do this.
4 to 8 hrs
Screwdriver, Wrench Set, Adjustable Wrench
Pretty much followed everything described here:
https://youtu.be/iASdiPdrDsU
I kept my motor and pump. I replaced the seal plate, impeller and diffuser. The impeller valve kit appeared to have everything needed and I could have got away with cleaning up the calcium build up, but opted to replace those 3 parts noted earlier since I had it opened up. This video is great and helped me have the understanding to replace the parts in my own. I no longer have a leaking super II. Looks like I need to replace the cartridge filter too as the water pressure in the pool is inadequate. Suction on the attached rebel vacuum is strong. Thank you Inyo!
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great Instructions, good fit
Was this review helpful to you?
(5 out of 5 stars) Hayward Super 2 Pump Parts
Reviewed By: Inyo Customer ()
Perfect replacement for my Super 2 Pump
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works Great...
Was this review helpful to you?
0 1
(5 out of 5 stars) Great Replacement Parts
Reviewed By: Thomas M. from Mobile, AL ()
Product arrived when thy said it would. Installation was easy and everything is working fine so far.
Was this review helpful to you?