$166.85

Qty:

By Astral


Details

Top

Part # 4860-004

Manufacturer Code 22358

Dimensions 12" L x 8.5" W x 9" D

Alternate Part #'s 066110200, 06611R0200, 06611R0201, 22358, 26-250-1000, AST22358

Product Description

Multiport Valve, Top Mount 1-1/2" - 22358

The replacement Sight Glass (00600r0002) With Gasket is available, click the link to view https://www.inyopools.com/Products/07501352041890.htm 

Top

?     Asked on 1/31/2012by Guest

I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
 Reply

A  Answered on 1/31/2012 by InyoPools Product Specialist Patrick P.

In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
 Reply


?     Asked on 5/10/2015by Annmarie

My astral valve top serial number is #22358n. Will your part # 22358 fit it?
 Reply

A  Answered on 5/10/2015 by InyoPools Product Specialist Patrick P.

Yes Annmarie this would be the proper replacement for your Astral Top Mount Valve #22358n.
 Reply


?     Asked on 5/28/2015by Inyo Visitor

when I backwash the water comes out the backwash and the pool outlet what is causing this thank you in advance
 Reply

A  Answered on 5/28/2015 by InyoPools Product Specialist Patrick P.

Your issue would be a result of a bad spider gasket. If you let us know which filter you have then we could suggest the proper spider gasket.
 Reply


?     Asked on 6/11/2015by Bree

I changed the sand but after turning on the filter system sand is settling on the floor of my inground pool. Do i need to replace the multi port? I am a newbie and the pool is at least 10 years old.
 Reply

A  Answered on 6/12/2015 by InyoPools Product Specialist Patrick P.

Hi Bree, I would suggest taking a look at our article on Getting Sand Back in My Pool as it will walk you through common troubleshooting tips to help you figure which item needs to repaired or replaced. In general new sand has alot of finer particles that pass through the filter and back into the pool. This will decrease as the sand settles down. Also with new sand you want to make sure you do not overfill your tank, so you will want to make sure you added the proper amount of lbs. of sand as indicated on your filter label, if you exceed this amount you could get sand back in the pool.
 Reply


?     Asked on 6/12/2015by Mark

I think I need a new spider gasket but before I take apart my multiport valve (Astral 22358 ) I was hoping you could tell me something so I don't screw up. How do I know what position the value lid needs to be in? I see an arrow on the lid but no marking on the body. Is there another way to know? Thank you!
 Reply

A  Answered on 6/13/2015 by InyoPools Product Specialist Alex V.

Mark, Before taking the valve apart, I would recommend marking the top and bottom with a marker or tape so that you will know how to re-install it correctly.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
9 Rating
5 star:
 
(9)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews