Part # 5110-10J
Manufacturer Code SPX3010C
Dimensions 4.75" X 0.55"
This Impeller is not the Hayward™ original Impeller and is an After-Market generic Impeller by Pureline
After-Market 1 HP full rate / 1.5 HP up rate impeller by PureLine used on the Hayward™ Super II and Super Spa pumps and Leslie's™ Hydromax II
Compatible With
*Inyo Pools is not affiliated with Hayward® Industries Inc. The use of such trademarks herein is for informational purposes only, and the goods are not those of Hayward® Industries Inc, but rather they are simply compatible with the referenced Hayward® product.
.
After I changed the new impeller, why is water leaking out from the bottom of the pump?
Reply
Hi Minh - This is most likely your shaft seal which needs to be replaced. If you have the Hayward Super II then you would need the Hayward Super II Shaft Seal we also carry a Hayward Super II Tune up Kit which includes the shaft seal as well as all the o-rings and gaskets for your pump. I typically would recommend going the Tune up Kit route as this will ensure that you are replacing all the items which typically cause this leak.
Reply
How do I remove the impeller from a Heywood pump\motor?
Reply
Hi Roy, Here we have a Video on How To Remove a Hayward Impeller which will go over all the steps you need to take to remove your impeller.
Reply
Do you have a impeller kit with all the part needed to replace impeller and defueser?
Reply
Hi Art, There is not a kit that includes the impeller and diffuser for the Hayward Super II Pump, these items will have to be purchased separately.
Reply
I am buying your pump motor # c48l2n134c1 need shat seals part #.
Reply
To find the correct shaft seal, we need to know the model number or make and model of your pump's housing. This motor can be mounted on several pump housing, and each one can use a different shaft seal.
Reply
The Most Helpful Review
3 0
(5 out of 5 stars)
Reviewed By: Alex N. from Manteca, CA ()
Pros: 100% SATISFIED
THIS ITEM REDESIGNED FROM ORIGINAL ORIGINAL PART WHICH I STRIPPED WHEN I REPAIRED MY PUMP. THIS NEW PART HAS METAL SCREW DOWN ASSEMBLY IN LIEU OF PLASTIC ON OLDER ORIGINAL PART. WORKED GOOD AS A FIX FOR MY PROBLEM.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked perfectly
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works great...
Was this review helpful to you?
(5 out of 5 stars) Quick shipment of product as described
Reviewed By: Inyo Customer ()
Quick shipment of product as described.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Karen F. from groton ma ()
Cons: took over a week to recieve pool went green
Was this review helpful to you?
(4 out of 5 stars) Pump parts
Reviewed By: William W. ()
Fast, accurate, simple process that resulted in a an excellent part and operational pool.
Was this review helpful to you?
(5 out of 5 stars) Excellent Product
Reviewed By: John D. from Winter Springs, FL ()
Pros: easy installation
I found Inyo Pools online. I bought several items from them and they are very quick to deliver. My motor and pump failed and I was able to find the right parts and they were delivered the very next day. This impellor is a direct replacement, so it was real easy to swap out.
Was this review helpful to you?
(5 out of 5 stars) impeller replacement works fine
Reviewed By: Jeff J. from Austin, TX ()
Nothing special about it, but the replacement part works fine.
Was this review helpful to you?