Part # 3237-130
Manufacturer Code W60050
Dimensions 5.75" L x 3.75" W x 3.5" D
The Flowkeepr valve for the Baracuda G3 pool cleaner is designed to regulate the rate of flow so that the pool pump and the G3 cleaner run properly. Pool pumps provide more gallon per minute flow than the G3 cleaner requires and the self adjusting flowkeeper valve provides a by-pass. The flowkeeper valve must be used in single skimmer pools for the G3 cleaner to run properly.
Flow keeper valve goes down on the cleaner in the pool? or up in the skimmer? Also, which end is up when installed? I bought a used Zodiac Beta with no instructions and don't want to wonder why it won't work if I install it wrong. Thank you Greg
Reply
Hi Greg, Side the has the window (longer end) goes down into the skimmer.
Reply
why my barracuda vacuum stop w/c I clean my filter 2 mos ago, when I used the skimmer run smoothly you can tell by the flow of the water.
Reply
Good morning Rene, Do you have suction on the skimmer? If so it could be that the diaphram inside the cleaner is stretched or has a hole in it. We do sell the diaphram but I would check to see if this is your problem. If so, You can find that part by typing Barracuda parts in our search bar.
Reply
The Most Recent Reviews
(5 out of 5 stars) Just what I needed!
Reviewed By: Perry R. from Woodbine, GA ()
Pros: rapid shipping amazing how fast you got it to me.
Cons: none
I saw it and knew it was the same as the part my dogs chewed up. I won't be leaving it in the yard anymore. I didn't think I would be able to find one but there it was.
Was this review helpful to you?
(5 out of 5 stars) works great the best
Reviewed By: bill from pikeville tn. ()
works better than the old one finaly found a place that had some parts
Was this review helpful to you?