Part # 3260-A020
Manufacturer Code A20
Dimensions 4.77" L x 2.8" W x 2.8" D
Replacement head float for Polaris and Pentair Pressure Cleaners by CMP
Commonly Used On
Sometimes my Polaris cleaner cat walks and I was told that this float a20 could be the problem. Is this true?
Reply
Yes this sometimes can be the issue. The best way to be sure is by taking this float off and checking to see if water has filled it or gotten inside. This will make the rear of the cleaner weigh more than designed causing the cleaner to cat walk.
Reply
Does this come with the screw on piece that connects this to the unit, and is it a difficult job?
thanks, mike
Reply
Hello Mike - All that is included is the float. The installation is simple. The head float threads onto the feed pipe.
Reply
Does this part control the forward direction of the vacunm?
Reply
No, the float is there to bring the cleaner upright if it falls from the walls. What controls the forward direction are the belts inside the cleaner.
Reply
What is making my Polaris 360 float to the top of water and not want to stay on the bottom?
Reply
Hi, The following things will cause you cleaner to float: Air in the unit or lines or the Base Weight is missing or out of place.
Reply
