Part # 5056-10C
Manufacturer Code C1-200PA
Dimensions 6.5" O.D.
INYO # 5056-10C STA-RITE # C1-200PA
This is a generic replacement diffuser for Sta-Rite Dura-Glas and Max-E-Glas pumps. Works with the following models:
Dura-Glas 3/4 - 1.5 HP full rated and 1 - 2 HP uprated
Max-E-Glas 3/4 - 2 HP full rated and 1 - 2.5 HP uprated
Features:
Dimensions:
Related Parts (sold separately):
5056-11 Diffuser O-ring
5056-22 Diffuser mounting screw (5 required)
5056-23 Screw Lock Washer (5 required)
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
i need an impellar for my sta rite( one and a half) hp pump.I am unable to read the part number on the impellar. However the part number on the diffuser is c1-200pa
could you match an impellar for me by knowing only the diffuser part number.
Please let me know if possible since I would like to order this part.
Thanking you.
Reply
Hello Doug - The impeller should be part number 5056-09D. Here is a link to view the measurements. This should help you verify the impeller.
Reply
My diffuser has several small cracks in the inter circle of the unit but the washe is still tightly in place. I'm replacing the motor do I need a new diffuser? Order 704406
Reply
My diffuser has several small cracks in the inter circle of the unit but the washe is still tightly in place. I'm replacing the motor do I need a new diffuser? Order 704406
Reply
It is possible that the diffuser will still work okay but if the cracks pass completely through the plastic then I would advise to replace it. Also since it may just be the beginning stages of wear and getting brittle then I would advise to replace the diffuser.
Reply
Sorry for so many questions. From the my pump # in the pic., which diffuser would I need to get? Mine had a lot build up, or corrosion on it. Or, is it something that can be cleaned up and reused?
Reply
Sorry for so many questions. From the my pump # in the pic., which diffuser would I need to get? Mine had a lot build up, or corrosion on it. Or, is it something that can be cleaned up and reused?
Less than 1 hr
Screwdriver, Pliers, Socket Set, Adjustable Wrench
0 1
The Most Recent Reviews
(5 out of 5 stars) Good quality
Reviewed By: Inyo Customer ()
Good quality but I ordered the wrong one. Inyo was great and helped me through the return process.
Was this review helpful to you?
(5 out of 5 stars) Fits as recommended and works great.
Reviewed By: Inyo Customer ()
Fits as recommended and works great. Thank you staff for your match of the correct product.
Was this review helpful to you?
(5 out of 5 stars) Exact fit
Reviewed By: PoolSlave from Orchard Park, NY ()
Pros: Exact Fit
Cons: Not simple installation
With numerous pine and fir trees near my pool, the small little needles can make it past the skimmers, often getting lodged between the impeller and the defuser. Eventually the impeller and defuser wear down and even the slightest gap can cause a loss of pump efficiency. Installation is not hard, but not simple either. Plenty of instructions on YouTube and can be accomplished with basic handtools. Fortunately, this part is a direct drop-in replacement for my Sta-rite pump and things are back up to pressure and efficiency.
Was this review helpful to you?
(5 out of 5 stars) Diffuser
Reviewed By: John P. from DeBary, FL ()
Pros: Came quickly
Parts came quickly. Inyo Customer service is very helpful.
Was this review helpful to you?
(5 out of 5 stars) Diffuse the situation...
Reviewed By: Marty R. from Tampa, FL ()
Pros: OEM fit, No issues
Cons: No screws
First one arrived broken but was replaced after I sent a picture of the damaged unit still inside the package. Keep your screws! I threw mine away and this does not come with new screws.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kevin M. from Tucson, AZ ()
Pros: Great, Fast Service
Thanks, This was the correct part, and quickly delivered.
Was this review helpful to you?
(5 out of 5 stars) easy to install diffuser
Reviewed By: Ally-gator from Sonoma County, CA ()
Pros: Easy to install
Cons: none
Our original diffuser had some cracks. The pump was noisy. I replaced this in about 5 minutes with no problem. The pump is now quieter and more efficient.
Was this review helpful to you?
(5 out of 5 stars) pump diffuser
Reviewed By: ronboy from leesburg fl ()
Pros: good fit
Cons: none
easy to install; fast shipping; increased effiency; took care of noise problem. will buy more products in future
Was this review helpful to you?