Part # 4600-1168
Manufacturer Code E-11-S2
Dimensions 6.75" L x 6.75" W x 4.75" D
2" Valve Diffuser manufactured by Praher and used on a number of 2" valves from Jacuzzi, Sta-Rite, Pentair and Waterway. Please note that the 5-spoke diverter gasket is sold separately.
This diffuser is included in the E-50-S2B 2" Valve Top Assembly.
I just the replaced the spoke gasket,spring and washers on the dial but the handle does not have any tension on it ,have any ideas
Reply
I rebuilt the Jandy SM20-2 top part and need to know how to align the handle with the hole in the diffuser.
Reply
Hello Walter, for clamping the SM20-2 valve needs a special type clamp vice to make sure even amounts of pressure is on all sides or you could break/crack top assy.
Reply
Does this replace the diverter on a Praher SM20-2? I broke the top of the diverter where the pin goes through. Would you suggest the whole assembly be replaced or is the diverter piece enough? I assume I can reuse the gaskets. Thanks
Reply
Hi, Mike M. This Diffuser will fit the SM20-2 valve. However, replacing the Valve Top Assy - E-50-S2 will be easier and more efficient. The Diverter Gasket - 271148 and the Cover O-ring - 271151 are not included.
Reply
