Part # 5270-11
Manufacturer Code BC-124
Dimensions 1-7/16" x 2-3/4"
Start Capacitor 1-7/16" Diameter x 2-3/4" Tall
Commonly Used On:
I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
I need the part number for a start capacitor for Pool Pump Motor UST 1252. I called the technical help line and they told me to buy capacitor BC 124. BC 124 is rated for 125 VAC and Pump UST 1252 is 250 VAC. The start capacitor I am replacing is rated for 36uF and 250 VAC. Please let me know what replacement start capacitor I need to order.
Thank you, Ray Smith
Reply
Hello Ray, the Capacitor you will need for a UST1252 would be Part # 5270-09 MFD 220-250v 36-43 (bc36m-250-s).
Reply
I need to replace the capacitor for my pool vacuum motor. The information on the motor is gone. The information on the capacitor is NGM 61B1D160124NNME, 124-149 MFD, 165 V AC
OP. T. MAX 65 C 50-60 Hz
lot 61080719
14/03/2006
157697-28
I do not know if this is start or run capacitor.
Which capacitor replacement should I buy?
Reply
Hi, Based on the on the info provided you're in need of a stat capacitor which the BC-124 will replace.
Reply
I have the same capacitor that needs to be replaced (165 vac) . However, the capacitor you are recommending has a lower voltage rating (125 v). Am I missing something here?
Reply
the capacitor from my pool pump has the following info on it:
610807-001
60hz
124uF
125VAC
do you have a capacitor that would work?
Reply
Yes, that would be the correct capacitor according to the part number you provided.
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
I wasn't positive it was the start capacitor, even after checking with my ohm meter. Purchased the replacement. It arrived 5 days later. Only shocked myself a couple times even though I grounded it several times. Perhaps it was the run capacitor which I didn't ground. Short story? I installed it and the motor and pump started right back up! Much cheaper than a brand new motor. Thanks!
The Most Recent Reviews
(5 out of 5 stars) Ground your capacitors
Reviewed By: Inyo Customer ()
Arrived in 5 days and did the job! Motor started right up after replacement.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Didn't know what was happening with my pump wouldn't start right away had to turn switch on and off several times to start, emailed INYO and ask ?about what was happening and the next morning received email telling me what they believed what happened and let me know what part I needed to order. Fix the problem with pump haven't had anymore issues with the pump.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
After it is installed, the pump works like new now.
Was this review helpful to you?
(5 out of 5 stars) Great!
Reviewed By: Inyo Customer ()
Easy to install. Watched your video to troubleshoot. Inyopools has saved the day again!
Was this review helpful to you?