Part # 5270-14
Manufacturer Code BC-161
Dimensions 1-7/16" x 2-3/4"
Start Capacitor 161-193 MFD - BC-161
Dimensions:
I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
I need to replace the start Capacitor on my A O Smith C48K2PA105C5 MOTOR.
It's 115/230 1hp USQ 1102 and the rating are unreadable on the capacitor.
How can I find out what rating I need?
Reply
Hi Steve, yes this is the correct start capacitor for the USQ1102 motor.
Reply
I need a capacitor for a Jacuzzi pool pump, A. O. Smith 1.5 hp 230/115v 3450RPM. Can you tell me the correct part number for this product?
Reply
Bryan, We will need to know the MFD and voltage of the capacitor or the catalog or part number of the motor to find the correct replacement capacitor.
Reply
Century motor 3.HP cat # SQ1302V1 I need to replace run start capacitor Can you tell me what one I need.
Thanks
Mike
Reply
Hi, Unfortunately we do not have what size capacitor is used on the A.O. Smith 3 H.P Square Flange Motor (SQ1302), you will need to provide us the specs off of the old capacitor.
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
3 0
Less than 1 hr
Screwdriver, Pliers
4 0
My pool man wanted to change motor 500. Dollars I check your website and found out it was probably just the capacitor ordered from you came in 4 days twenty minutes to change motor running fine. Thank You Inyo pool saved me 470 Dollars
Less than 1 hr
Screwdriver, Pliers, Voltage tester
5 0
First, as always, turn off the power to the pool pump at your panel and then verify it by using a voltage tester.
Next, remove the two screws holding the cover over the motor.
Remove the clamp over the old capacitor and note the wire placement; then take a screwdriver with a plastic or rubber handle and touch the terminals together (pro tip if you are worried, hold a paper towel between you and the capacitor). This will short out the capacitor and discharge any voltage stored in it. Then with a pair of pliers pull the wire clamps off.
Attach the wires back onto the capacitor (It should have 2 yellow wires on one terminal and a red and white wire on the other).
Put the capacitor back in place with the plastic guard over the terminals and then tighten the clamp.
Put the cover back on, then go turn the main breaker back on.
Less than 1 hr
Screwdriver, Pliers, Socket Set
4 0
I removed the motor from from the pump housing. I then removed the cover from my pump motor. Locating the capacitor, I carefully discharged the old capacitor and the new capacitor to prevent shocking. I removed the old cap connections and wired the new cap placing into the same spot. I put the cover back on the motor and reattached the motor to the pump. I plugged in the pump.
The Most Recent Reviews
(5 out of 5 stars) Usually the biggest fix for a bum super pump
Reviewed By: Inyo Customer ()
As a new super pump is about $800 and 90% of the time I’ve found it’s just the start capacitor, folks should honestly just swap it out if your pump is humming on start or slow start
Was this review helpful to you?
2 0
(5 out of 5 stars) Pump starts perfect now
Reviewed By: Inyo Customer ()
Replace in all of about 1minute. Match the old capacitor spec’s and size. Pump starts with ease now.
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?
2 0
(5 out of 5 stars) Good for a replacement
Reviewed By: Inyo Customer ()
Was in working condition. Had the lowest rating for capacitance when checked for actual rating. It stays in 161 to 165 range though it says till 193 MFD.
Was this review helpful to you?
3 0
(5 out of 5 stars) Easy to install. Thanks for the videos!
Reviewed By: Inyo Customer ()
Easy to install. Thanks for the videos!
Was this review helpful to you?
2 0
(5 out of 5 stars) Quality Part for a Great Price
Reviewed By: Inyo Customer ()
Great price and arrived fast. Easy fix and got my pool motor back up and running.
Was this review helpful to you?
2 0
(5 out of 5 stars) Quick delivery!
Reviewed By: Inyo Customer ()
The part was delivered very quickly, and it was exactly what I needed for my pump.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great price and fast delivery
Reviewed By: Inyo Customer ()
Was helped by the technician on this and was exactly what I was need to repair the motor saved me a lot of money
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Bought a new motor and will use these to rebuild the original as a spare. Like getting two motors for the price of one.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Exactly what I was looking for!
Was this review helpful to you?
(5 out of 5 stars) Quality Product OEM
Reviewed By: Mike from Orlando, FL ()
Pros: OEM Product
Cons: none
Was this review helpful to you?
(5 out of 5 stars) Start Capacitor
Reviewed By: David M. from Middleburg, FL ()
Pros: Easy to install
Cons: None
Easy to install and cured the problem.
Was this review helpful to you?
6 0
(5 out of 5 stars) Quick fix for stalled motor
Reviewed By: PoolVacMan from Boxford, MA ()
Pros: Easy to replace
Cons: Need to respect capacitor shock hazard
My 1.5 hp A.O. Smith (now Century) motor began to start slowly and then not at all; humming and popping the breaker. This capacitor was an easy replacement (three connectors and a screw under the motor cover). The motor now starts instantly.
Was this review helpful to you?
(5 out of 5 stars) perfect fit
Reviewed By: Tim P. from estero,fla ()
Pros: exact fit
Cons: none
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Michael A. from Trussville, AL ()
Pros: Exact spec. as needed.
Cons: None
The capacitor was a perfect fit. The motor was just humming until the capacitor went in. Now it runs like a new motor.
Was this review helpful to you?
(5 out of 5 stars) Capacitor (161-193 MFD)
Reviewed By: Professor from Carrollton, GA ()
Good product. Works as expected.
Was this review helpful to you?