By Hayward Pool Products
Part # SP1022
Dimensions 3.5" L x 3.5" W x 1.75" D
Wall Fitting 1-1/2" FPT - Concrete - SP1022
This fitting feels very tight threading into a 2" standard female PVC1 schedule 40 LASCO wall fitting- is it an incompatible thread?
Reply
Hi Greg, This fitting is designed to thread into an 1-1/2" female thread not a 2" female thread, however if you have a 2" female thread this would very loose, so I am stumped on this one.
Reply
What gasket go with this for above ground
Reply
The part number for the Complete Above Ground Inlet 1 1/2"" Threaded - is SP1023G. You may use the Hayward SP-1023 Pre-Fab Wall Receptical Parts Diagram for replacement parts, click here to view.
Reply
I have above ground 24 ft pool looking for the 2 gasket that fit this
Reply
Ronald- There are no gaskets that would fit this for an above ground pool. But you would use this Complete Above Ground Inlet 1 1/2"" Threaded - SP1023G
Reply
My undestanding is that the SP1419F-1 is no longer available. What do I replace this with?
Reply
Hi Michael. This Direc stream w/ext flange, 1-1/2"mpt x 3/4"eye works well in most applications that used the old SP1419-F.
Reply
