Part # PL0182
Dimensions 24" L x 12" W x 6" D
Time to Replace Your DE Grids?
Our DE Grids are used on the most common pool filters including American Products®, Pentair®, Hayward® & Pac-Fab®. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years then now is the time to replace your DE grids.
Things to Consider When Replacing Your DE Grids
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I need to order replacement grids for my d.e filter but I'm not sure which ones to order. How do I know which one is the right one?
Reply
The easiest way to figure out the correct grid would be to measure the length and width and compare it to the measurements we have listed on the product page.
Reply
I have a Pac-Fab Nautilus FNS 24 filter. Which of the grids will replace the current grids?
Reply
I was wondering if these grids will fit my filter.
Waterway Crystal Water Filter, DE 48 Sq Ft, Model: 570-0048
Thanks
Reply
These are not the correct grids for the Waterway Crystal Water D.E. filter model 570-0048. There is a smaller 48 sq. ft. grid part number 4742-100 and the larger grid part number 4742-103. This model takes 7 of the large grids and 1 of the smaller grid.
Reply
1 to 2 hrs
Wrench Set, Adjustable Wrench
3 0
After opening the air relief valve to remove the pressure from the tank, I removed the tank cover. Then I took the grid assembly out of the tank. I disassembled the unit by removing the 5/16" locking nut from the top while holding the 7/16" nut at the bottom with an adjustable wrench. After disposing the old grids and hosing down the residual de from the other parts, with the aid of a video from YouTube, I reassembled the grids in the upright position using a grid guide costing $15 from a local retail store that really made it easy to attach the manifold. Reinstall the locking nut and place the complete grid assembly back into the tank. The whole process was fairly straight forward but took some patience. Most important thing is to replace each grid in the proper order. Total time spent about two hours.
Less than 1 hr
Socket Set, Socket set
2 0
Turn electric power to DEFilter off.
Remove grids and inspect if they need to be replaced.
Replace grids by sliding into position
When through replace top to position grids
Then place grid assembly in DE filter hosing
Attach top of DE filter with clamp
Turn electric power on.
1 to 2 hrs
Wrench Set
4 0
I only had to replace one of my filters and I learned a valuable lesson. When disassembling the filter assembly, it should be placed upside down, and then remove the bottom grid holder nuts and remove the plastic assembly. This allows all the filters to remain in place and attached to the upper grid.
When I worked from the top, and disassembled the nuts everything fell apart and I had a terrible time figuring out how to get the grids back together. I also didn't realize that the bottom grid has a 1/8 diameter cut-out on the below the main return tube to the pump.
I put everything back together spun by 180 degrees, so that the return pipe and cutout were on opposite sides and had to start all over again.
Less than 1 hr
Socket Set
4 0
My pool guy told me that there was diatomaceous earth being recirculated through the plumbing resulting in DE on the floor of the pool. I turned the pump off, opened the filter valve, released the filter belt, removed the filter lid and rubber seal, then pulled the grid assembly up and out of the filter unit (beware - it's heavy).
After unscrewing the two retaining nuts on top of the assembly, carefully pulling off the header unit and removing the thin, plastic grid alignment template, I pulled each grid from the assembly and hosed them down. In two of the grids, I had holes, one reasonably small but the other about the size of a mans thumbnail.
I'd never replaced the grids since owning the pool (over 12 years) so I purchased a complete set from INYO which turned up promptly and in good condition. Replacing the grids was simple (I always place the smaller grid first into the assembly, then each larger grid in order around the base unit) and then put the template back on to position the grids to ease the re-installation of the head unit.
I then screwed the two retaining screws back onto the top of the head unit to secure everything. At this point I coated the filter rubber seal with lubricant, carefully placed it onto the lip of the filter base and then replaced the entire grid assembly back into the filter base - I find it easier to have the filter seal positioned before installing the assembly.
I then placed the filter lid back onto it's base, I close the filter valve and carefully twist the lid so that the valve is readable in it's closed position from in front of the equipment, **open the valve again** and then tighten the filter belt that seals the filter lid from it's base.
Ensuring that the filter valve is open, I then turned on the pump, waited until water continuously poured out of the filter valve, closed the valve and waited for the system to purge itself of air (no more bubbles coming out of the pool's feed pipes). I ran the (variable) pump for about 6 hours (full speed) after which I checked and all DE earth had been removed from the floor.
I also noted the filter pressure (at various speeds) so that I can refer to these pressures knowing that when dirty, the pressures will increase giving me a good indication as to when they need to be cleaned again.
Less than 1 hr
Socket Set
3 1
2 to 4 hrs
Wrench Set, Adjustable Wrench
4 0
When I removed the old grid assembly it was totally caked with old DE dirt. Even after back washing. This is the first time disassembling. Brought home about a year ago. Ordered new grid due to DE dirt being pumped back into pool. Wish you offered a complete kit with all 8 grids. Did not understand what a partial grid was until I disassembled the filter unit. Partial means one of the grids a smaller. So I did not order the partial grid. Will have to order this part and disassembly filter again to install this part. Could not find clear instruction on reassembly of grids. Figured it out after about 1/2 an hour. Need to assemble it upside down. And the grids need to start outside of the bottom filter locator circle. There is this molded in circle in the filter locator. The tips of the filter need to be outside of this circle. For the grid to fit properly.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fit perfect thank you
Was this review helpful to you?
(5 out of 5 stars) Good quality product instead of filter replacement
Reviewed By: Inyo Customer ()
Inyopools ship quickly and send name brand products at very fair prices. Nothing too sexy about filter parts - they work!
Was this review helpful to you?
(5 out of 5 stars) love it
Reviewed By: Inyo Customer ()
quick and easy to install
Was this review helpful to you?
(5 out of 5 stars) Thank you
Reviewed By: Inyo Customer ()
Perfect fit and the video was simple and answered all my questions.
Was this review helpful to you?
1 0
(5 out of 5 stars) Work great and fit in filter great
Reviewed By: Inyo Customer ()
Fit my Hayward DE filter 48 sq ft.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fantastic product. Speedy delivery. Amazing customer service!!!
Was this review helpful to you?
2 0
(5 out of 5 stars) Filter fit perfectly
Reviewed By: Inyo Customer ()
The grid fit right into my old nautilus 48 sq foot filter. I was nervous because my filter was so old that it had a slightly different model number (NSS-48) than the ones on the website. I am buying a full set now since this went so well.
Was this review helpful to you?
1 0
(5 out of 5 stars) Good product
Reviewed By: Inyo Customer ()
Quick shipping, part fit perfect!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
With help from customer service all items were what I needed ... Thank You
Was this review helpful to you?
1 0
(5 out of 5 stars) D.E. Filter Grids: OEM, great price, on time
Reviewed By: Ron in Calif. from Sacramento, California ()
Pros: On time, OEM, super price
Cons: None
To be honest I had some trepidation because of some less than stellar reviews. But the price was irresistible. The fileters were shipped same day as promised, arrived within 5 business to Calif. as promised (with the FREE shipping), and were OEM filters in perfect condition. And I saved a boatload of money over other online sellers and my local pool supply. I will definitely use them again.
Was this review helpful to you?
2 0
(5 out of 5 stars) Exact original manufacturer part
Reviewed By: Gary B. from Leesburg,Va ()
Pros: exact fit and performance
Cons: none
1/2 the price I paid at the local swim shop-original part from manufacturer--that's all there is to say.
Was this review helpful to you?
1 0
(5 out of 5 stars) Replacement Grid
Reviewed By: David P. from Southern Cal. ()
Pros: Price, fit and form.
Cons: Wait for delivery, plan for delivery time.
Great price and service.
Was this review helpful to you?
1 0
(5 out of 5 stars) Great Grid
Reviewed By: Diana K. from Uniontown, Ohio ()
All of our grids were old and tore and it was difficult to keep the pool clean. It was great to receive these grids and we are having an easier time in keeping the pool clean. The on-line ordering was easy and product was received within the time specified.
Was this review helpful to you?
(5 out of 5 stars) Good product
Reviewed By: Pierre K. from 93505 ()
Pros: Fits fine
Cons: None
This is a good product.
Was this review helpful to you?
1 0
(4 out of 5 stars) no trouble installing replacement
Reviewed By: Lisan L. from Dallas TX ()
Both full and partial are compatible with my filter (Hayward DE-4800) and had no trouble installing them. Shipping is prompt. Quality needs time to tell.
Was this review helpful to you?
1 0
(5 out of 5 stars) 48 sq ft full grid
Reviewed By: Randy D. ()
Pros: priced very well and fast
This grid was exactly what i had been looking for and the web site was easy to find what i needed. I had DE leaking into my pool through a hole in one of the grids. After replaceing the damaged grid the problem was solved. Perfect fit, great price and fast delevery!
Was this review helpful to you?
(5 out of 5 stars) 48 Sq. Ft. Full Grid 24 (7 Required)
Reviewed By: Mike O. from Long Island, NY ()
Th replacement grids were shipped in a timely manner and arrived in perfect condition. They fit perfectly into my old Heyward filter unit and resolved the issue i was having with the DE material getting into my pool. And they were better priced than the local pool supply stores in my area.
Was this review helpful to you?
1 0
(5 out of 5 stars) great replacement product
Reviewed By: Mark M. from Corpus Christi, TX ()
Pros: Easy access on the internet
Replacement filter parts were as indicated on web site and delivered earlier than expected. Parts were competitively priced and ordering was easy on the internet web site.
Was this review helpful to you?
1 0
(4 out of 5 stars) pool grids
Reviewed By: Melanie C. from hesperia, CA ()
this was exactly what I wanted as far as the filter goes.
Was this review helpful to you?
1 0
(5 out of 5 stars) Durable product
Reviewed By: Charles G. from Lake Balboa, CA ()
Pros: Sturdy. Fit perfectly.
Cons: None
These were replacements to the OEM Parts. They actually feel more sturdy and durable than the original filters.
Was this review helpful to you?
(5 out of 5 stars) Great prices
Reviewed By: Jeff W. from Templeton, CA ()
Pros: Good prices and quick delivery
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Wesley B. from Kennesaw, GA ()
Perfect fit to replace our deteriorated filter blades.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Steve T. from San Tan Valley, AZ ()
Pros: Excellemt quality
Exact replacement Grids. Perfect fit!
Was this review helpful to you?
(5 out of 5 stars) d.e. filters
Reviewed By: Kenneth D. from San Rafael, CA ()
great fit great price all great thanks
Was this review helpful to you?
(4 out of 5 stars) 48 sq. ft. full grid 24
Reviewed By: Ronald B. from park ridge, NJ ()
Pros: quality
product installed with little problems, working fine presently, hopefully holds up like or better than the originals
Was this review helpful to you?
(5 out of 5 stars) Grid Filters
Reviewed By: Oscar R. from Plano, TX ()
Great price, speedy delivery, product as described.
Was this review helpful to you?
(5 out of 5 stars) great product and price; fast shipping
Reviewed By: JodyR. from Limerick, PA ()
this was a great product, at an excellent price and shipped incredibly fast.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Daniel T. from Northampton, PA ()
Pros: all good
Cons: none
exactly what i needed. great price also
Was this review helpful to you?
(5 out of 5 stars) Missing Grid
Reviewed By: Stanley B. from Alvin, TX ()
Product received was fine. But! Ithought I was getting a complete set of grids. Your ad did not state or even hint that a smaller grid was also required, nor was one advertised for purchase.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Dennis O. from Ponchatoula, LA ()
Grid fits the same as original
Was this review helpful to you?
(4 out of 5 stars) good product
Reviewed By: airborne from madera ca ()
Pros: good product
Cons: order incomplete
product is very good,except I didn't get the partial grid in my order
Was this review helpful to you?
(5 out of 5 stars) Filter Grid replacement
Reviewed By: Happy Customer from Detroit, MI ()
Pros: Saved me LOTS of money
Cons: NONE
I almost bought the replacement grids from a local pool supply store for $225 but found them at InYoPools for around $150
Was this review helpful to you?
4 0
(5 out of 5 stars) DE Grids
Reviewed By: Julie from Baltimore, Md. ()
Pros: Perfect fit, well made
Cons: none
these area very well made, fit perfect, easy to install. Quick delivery.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Julie from Halethorpe, MD ()
Pros: perfect fit, well made
Cons: None
These fit perfectly and were well made. I will definately buy from here again.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Julie from Halethorpe, MD. ()
Pros: perfect fit, well made
These grids fit perfectly and arrived quickly. They are very well made and are better then the originals.
Was this review helpful to you?
15 1
(5 out of 5 stars) De Grids
Reviewed By: vivogram from Bridgeview, Il ()
Pros: exactly what we needed
Cons: none
we looked all over for the parts for our filter. We have had it since 1985! the description off the parts as well as the fast shipping was awesome
Was this review helpful to you?