$114.45
By Raypak
Will this LCD display work with Model # P-M266A-EN-C S/N 1509283404? Is there any difficulty in installing this part and do I need any other parts if I replace this LCD Display? The display is barely visible but the unit is running fine.
Thanks,
Reply
Hi, Gary. Based on the info provided, this replacement LCD Display will work with your unit. As for replacing it, it is quite simple.
Reply
Good Day,
I'm looking for a new display for my RP2100 (P-R405A) S/N9910075700
Is this display the right part for my repair?
Thank you for your time and have a great day.
DJ
Reply
Hi, DJ. Unfortunately, this LCD Display Screen - 013640F is NOT compatible with your unit if you have the original PCB. The PC Board Control IID Unit - 010253F has been discontinued for your unit.
Reply
Ok...so here is the board that is currently in our heater(see attached pic). It was replaced at some point. So...back to my original question :) any ideas on how I can get the display replaced? Thank you so much for all your time and assistance. DJ
I will have to look at it a bit closer later today. I think I saw a date written on the board that would indicate that it was replaced some time after original manufacture, which I believe was in 1999. I will try to get a model number off of the board and get back to you. Thank you again for your assistance.
Reply
Is this part comparable with P-R206A-EN-X?
Reply
Hi Jim, This will work if your unit was manufactured after May of 2011. The heater’s model and serial numbers are located on the rating plate found on the inside of the unit. To locate the rating plate, first loosen the door screw. Remove the door(s), pull up and out. The rating plate will be either a gold or silver color with the Raypak logo. The serial number will have 10 digits. The date code is found in the first four digits of the serial number, for example, a unit made in April of 2001 will have the first four digits read as 0104.
Reply
