Model # T104R3
This heavy duty mechanical time switch is designed for industrial, commercial and residential applications. This time switch has the highest horsepower ratings in the industry for loads up to 40 amps resistive from 120 to 480 volts providing direct 24 hour time switch control of most loads.
This series provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models are equipped with one "ON" and one "OFF" tripper.
Applications:
• Booster Pumps
• Lighting
• Hydro Chlorinators
• Fans
• Air Conditioning
• Music and Signal Systems
• Heat Pumps
Accessories:
Click here for more Intermatic Timers
My pool pump motor indicates V115/230. Will thistimer accommodate the pool pump? Also,can you tell me the voltage on the clock motor?
Reply
Your pump can be wired either 115V or 230V If you have your pool pump wired at 230V than you would want to go with the T104P3 timer if you have the pump wired at 115V than you would want to go with the T101P3 timer. T104P3 timer has a 230V time clock motor and the T101P3 timer has a 115V time clock motor. You may purchase either of these time clocks through the following link http://www.inyopools.com/controls_intermatic.aspx
Reply
I have a T104R timer is this the proper replacement?
Reply
The T104R3 or the T104P3 are direct replacements for any T104 timer. The only difference between these two timers is that the T104R3 comes in a metal enclosure and the T104P3 comes in a plastic enclosure.
Reply
How many on/off devices come with the unit? I am using this for my eletric hot water heater, I want the heater to come on around 5:00AM and off at 7:00AM, then on again at 5:00PM and off and 7:00PM. So I guess I'm asking can I program two on and off's or do I have to buy something else?
Reply
This timer comes with one "On" tripper and one "Off" tripper but can accommodate up to 12 On/Off positions. So to accomplish the following "...come on around 5:00AM and off at 7:00AM, then on again at 5:00PM and off and 7:00PM" You would require the purchase of the timer which comes with 2 trippers, plus the purchase of one additional set of on / off trippers which you may view or purchase here http://www.inyopools.com/Products/02400004003526.htm
Reply
Does this timer have knockouts for the electrical and where are they located?
Reply
Here is all the information we have regarding the knockouts: Knockouts - Combination 1/2" - 3/4" nominal knockouts, one on the back and each side of case, two on bottom
Reply
I have a 1.5 HP pump for circulation and a 1.5 HP booster pump for my pool sweep. Will this control both if I wanted them to come on at the same time?
Reply
Hi, The Intermatic Timer 220 Volt Metal Enclosure can handle the two pumps if the max load does not exceed 40 amps.
Reply
The Most Helpful Review
1 0
(5 out of 5 stars) So pleased with my purchase
Reviewed By: Inyo Customer ()
Installed as soon as I got. Product works fantastic and was genuine part.
Was this review helpful to you?
The Most Recent Reviews
(4 out of 5 stars) Works good on 220
Reviewed By: Inyo Customer ()
Works good on 220
Was this review helpful to you?