By Hayward Pool Products
Part # SPX3400DR
Hayward® SPX3400DR Variable Speed Drive with Integrated Control Interface
The SPX3400DR is a replacement variable speed drive with an integrated control interface for select Hayward® EcoStar® and TriStar® VS pool pumps. This drive controls the speed and operation of the pump motor, enabling optimized energy savings and quiet operation.
Key Features:
OEM Hayward® replacement drive and control interface
Compatible with EcoStar® and TriStar® VS models
Integrated digital display and keypad for programming and operation
Offers multiple speed settings and programmable schedules
Helps reduce energy consumption and operating costs
Designed for outdoor use with weather-resistant housing
Compatibility:
Hayward® EcoStar® VS Pumps (SP3400VSP series)
Hayward® TriStar® VS Pumps (various models)
Replaces factory-installed drive/control on compatible Hayward® VS pumps
Part Number: SPX3400DR
Voltage: 230V
Installation Note: For safety and proper performance, this drive should be installed by a qualified technician.
My model number is SP3200DR
What motor drive do I need?
Reply
Brad, This is the correct motor drive unless your previous one included the safety vacuum release feature. If that's the case you need part # SPX3400DRVR.
Reply
which drive do I need for a Hayward sp3202vsp
Reply
Hi, Jim. This Drive Assembly is not compatible with the SP3202VSP, you will have to purchase the Power End - SPX3202Z1VSPE.
Reply
I purchased a Hayward SPX3400DRVR digital control interface, when I opened the unit there was a tag that says SP3200DRVR serial # 3VR19121-C03784, I am confused what did I receive ?
Thanks Pete
Reply
Hello, I can look into this for you. Do you have an order number I can reference this by?
Reply
I have a Hayward EcoStar SP3400VSP that dies last night with fault PUMP HAS STALLED. According to my package it came with an SP3200DR (thirty-two, not thirty-four). Is this SPX3400DR a replacement for my SP3200DR?
(Thank you to the invaluable David Van Brunt from swimmingpoollearning.com for pointing me in your direction.)
--Scott
The correct drive for this is the SPX3400DR
Reply
Does this part include the motor as well as the interface controller? Have t"stalled" SP3200DR". I am assuming due to controller chip on the board under the display. Pump is 5 years old connected in a really tight spot & want to avoid cutting pipes by slipping on new "back end" of pump and not touch pipe connections. Also are these refurbished parts or new? do you have a video for swamping this type of part? The one I found on Youtube from INYO seems to be much simpler model to repair..thanks.
Hi, Ray. This is the Drive Assembly only, the Motor Assembly - SPX3400Z1ECM is sold separately. These are new unrefurbished parts. We do not have a replacement video for this part.
Reply
