$34.04

Qty:

By Hayward Pool Products


Details

Top

Part # SPX1600Z2

Dimensions 3.75" L x 1.5" W x 2.25" D

Alternate Part #'s 35B1109, 60758, HAY1012020, SP1600Z2, SPX1600-Z-2, 35-150-1404, HAYSPX1600Z2, HPPSPX1600Z2

Product Description

Original Hayward Super Pump shaft seal also used on the Hayward Max-Flo, Super II and Super Spa pumps.  Replace your shaft seal to prevent leaks and protect your pool pump, especially important when replacing the pump motor.

  • Two part seal
  • Ceramic half 1-3/8" O.D.; 3/4" I.D.
  • Spring-loaded half 1-5/16" O.D.; 3/4" I.D.

 

Top

?     Asked on 1/25/2012by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


?     Asked on 6/14/2015by Mike

I have a Hayward 1 1/2 horse super II pump will this shaft seal fit my pump or do I need the model number to order it
 Reply

A  Answered on 6/14/2015 by InyoPools Product Specialist Patrick P.

Hi Mike, this is the correct shaft seal for a Hayward Super II Pump (no model # needed).
 Reply


?     Asked on 6/18/2015by Mike Baldwin

I have a Hayward super pump and had a drip where the motor mounts into the pump housing. I replaced the housing gasket and it is still dripping. Could the problem be something else. Any help would be great. Thanks Mike
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Patrick P.

Hi Mike, The most common culprit would be the Shaft Seal we would suggest replacing your Hayward Super Pump Shaft Seal.
 Reply


?     Asked on 7/10/2015by Dean

I have a Hayward pump and want to change the seal, is there more than 1 size
 Reply

A  Answered on 7/10/2015 by InyoPools Product Specialist Andy O.

Dean, Yes not every pump model has the same shaft seal. We would need to know the specific model of the pump to find the correct shaft seal for your pump.
 Reply


?     Asked on 6/11/2016by Ron

I am replacing the motor for my Hayward Super pump 1H.P. Model # C48K2N143B1 Is this the correct shaft seal for this motor?
 Reply

A  Answered on 6/12/2016 by InyoPools Product Specialist Matt S.

Yes, the the SPX1600Z2 is the correct shaft seal for the Hayward Super Pump.
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Wrench Set

Lightning storm ate our filter pump motor. Purchased the AO Smith 3/4 hp replacement and am very pleased. Good service and fast shipping.

Written on 8/8/2019 by Guest

Replace filter motor and ceramic seal.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set, Allen wrench

New spring loaded seal was defective

Written on 6/5/2019 by Guest

When I opened the package the spring loaded seal was in two pieces. I installed it and it proceeded to leak. So had to go to local pool place and get another one.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Socket Set, Wrench Set, Adjustable Wrench

3     0

Motor was bad and use the opportunity to change all the seals

Written on 3/30/2017 by Guest

Before you do the work, please watch the film that inyopools. , is excellent. You will see in detail step by step how to do it

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Socket Set

0     1

Bad motor

Written on 11/25/2016 by Guest

I had a bad motor and if you change your motor you have to change the seal kit. It was pretty straight forward.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.86  out of 5 stars)
35 Rating
5 star:
 
(30)
4 star:
 
(5)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews