By Aladdin
Part # GOKIT51
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Pump itself is fine, just leaking at impeller seal, if this is under the case, am I correct in presuming the seal in this kit should do the trick. (See photo)
Hello Robert, yes is the housing is leaking we would recommend replacing all the seals and gaskets. Which would be included in the GOkit.
Reply
