Part # UQC1102
Warranty 1 Year
Voltage 115/230, Max Amps 115V = 12.6 230V = 6.3, Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
Is the UQC1102 the correct replacement motor for Sta-rite model k48k2pa105c1 1hp Max-E-Glas?
Reply
Hello Kenneth - The UQC1102 would be the correct replacement motor for the K48K2PA105C1 1HP Max-E-Glas.
Reply
Is the UQC1102 the right motor for a Sta Rite model P2RA5F-182L pump and if so, which tune up kit should I buy with the motor? If not, then which motor and tune up kit would be correct?
Reply
Hello Chet - The correct replacement motor for the P2RA5F-182L is the UQC1152. The tune up kit for Dura-Glas models manufactured before 1998 is GOKIT6. The tune up kit for models manufactured since 1998 is GOKIT54. If your seal plate has a copper cone it is pre 1998. If it does not, you have a 1998-current model.
Reply
More than 8 hrs
Screwdriver, Socket Set, Wrench Set, Adjustable Wrench
Removed pump seal plate and motor. I also needed new seal plate so simply purchased diffuser - c1-200PA, impeller - C105-138PEB, Trap cover O-ring, 5056-15; Motor - UQC1102, and tune-up kit - GOKIT54. Assembled the parts and boom, you have it
1 to 2 hrs
Screwdriver, Pliers, Socket Set
1 0
Bearings went out. The motor began to grind loudly. I checked the numbers on the motor and ordered a replacement from INYO Pools. They had a perfect match. To replace it I turned off the breaker, removed the motor from the pump.
Stood it on end to pull the electrical cover and remove the three wires. Pulled them out and moved the new motor into the place where the wires could be connected. Two reds and a green went right into place. Put the cover back on the wires and attached the motor to the pump.
While the motor was off and the pump apart, I replaced the o-rings that INYO supplies as a kit. The new motor was quieter than the original ever was. This was an easy DIY, it just looks daunting. I'm not an electrician or mechanic.
The Most Recent Reviews
1 0
(5 out of 5 stars) Looks Great
Reviewed By: Inyo Customer ()
Tested motor and checked ok. Have mocked up but waiting to power up.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great pool pump
Was this review helpful to you?
2 0
(4 out of 5 stars) Energy Efficient Motor
Reviewed By: Dawn L. from Fernandina Beach, FL ()
Pros: easy to install
Cons: no "real" installation instructions
Although there weren't any "installation instructions" included (we found a couple of videos) - that's the reason for only "4 stars", it was still fairly easy to install. It's nice to have a quiet sounding motor running again!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: John S. from Folsom, CA ()
Pros: Easy to install
Cons: None
Easy to install and works great! I did use the video tutorial available from Inyopool and one I found on youtube.
Was this review helpful to you?
1 0
(4 out of 5 stars) Really quiet pool pump
Reviewed By: David H. ()
After installing the pump I was amazed how quiet it was compared to my old pump. Very happy customer.
Was this review helpful to you?
2 0
(4 out of 5 stars) Quiet Pump Motor
Reviewed By: Robert J. from Asheville NC ()
Pros: Quiet
Cons: Original motor defective from this mfg but warranty honored
This is the second pump motor I installed as the original pmp motor (same brand and model) had the bearings wear out prematurely and may have been defective from the factory initially. However, the replacement pump provided under warranty is extremely quiet and there were no problems installing it after replacing the shaft seal. Rob from Inyopools was extremely helpful in getting the mfg to replace the defective pump motor as it was within the one year warranty.
Was this review helpful to you?
2 0
(5 out of 5 stars) Easy to Install
Reviewed By: Marty R. from Tampa, FL ()
Save some money and install it yourself. There are a couple of videos on the internet that will explain exactly how to put in a pool motor. I had this one installed in about an hour.
Was this review helpful to you?
2 0
(5 out of 5 stars) High Efficiency pump motor
Reviewed By: James A. from Palm Coast, FL ()
Did not have to pay extra for express shipping. Noticed my old pump motor was having trouble on Saturday and had the new pump motor installed by Tuesday. Packaged well and right out of the box you can see that this is a SUPERIOR PRODUCT. Motor wired up exactly as the old one and the motor mounted correctly to the pump housing. Feels more powerful although the rpm is the same. I will have to see what impact it may have on the power bill.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Gena E. from citrus heights, CA ()
great replacement pump worked perfectly
Was this review helpful to you?
1 0
(5 out of 5 stars) Easy & quiet pump motor
Reviewed By: Jonathan W. from Oviedo, FL ()
This pump motor & the Go Kit arrived in a timely fashion, and the instructions for installation on the INYO web site (video & verbage) helped immensely. I'm only moderately adept with tools, but after about 1-1/2 hours, I had replaced the old noisy motor with this great quiet one! Thanks, INYO.
Was this review helpful to you?
1 0
(4 out of 5 stars) Replacement motor
Reviewed By: pool guy from Mount Vernon, WA ()
Pros: Energy efficient, quiet
Cons: none, so far
So far motor is performing as I hoped. It runs very quietly and I believe the added cost for the energy savings feature will pay for itself in short order.Time will tell as for the life of service.
Was this review helpful to you?
(5 out of 5 stars) Replacement pool motor
Reviewed By: Steven N. from Rochester, NH ()
Perfect match and energy efficient to boot, time will tell just how much efficient it will be.
Was this review helpful to you?
(5 out of 5 stars) great motor,very quiet
Reviewed By: William P. from narvon, PA ()
I Had No Trouble Mounting This Motor,And It Runs Smooth & Quiet
Was this review helpful to you?
(5 out of 5 stars) Easy Install!
Reviewed By: Stephanie G. from graham, WA ()
Pros: Good Price, easy install, quiet!
Cons: no instructions included
We purchased this motor and installed it this past weekend. Have to say I was quite nervous about this as my husband is not exactly mr fixit! More like Tim the Toolman! However, install went very smoothly and the pump is now running wonderfully and much quieter then before. Would suggest that install instruction be included however, as we had to search several sites to make sure we were doing it correctly.
Was this review helpful to you?
(5 out of 5 stars) Very efficient and quiet
Reviewed By: Oliver W. from Tampa, Florida ()
Pros: Energy efficient and quiet
Cons: None
I am extremely pleased with this product. Installation took about twenty minutes with a minimum of tools. This motor is not only an energy saver but it is quieter than my original motor when it was new. If you need a pool pump motor, this is the one.
Was this review helpful to you?
(4 out of 5 stars) Pool pump motor
Reviewed By: Jim Bob from Lilburn Georgia ()
Pros: Selection and quick shipping.
Cons: Not the cheapest price.
Was this review helpful to you?
11 0
(5 out of 5 stars) Perfect Replacement
Reviewed By: George C. from Homosassa, FL ()
Pros: Perfect fit for old motor
Cons: Removing old impeller - no way to grasp motor shaft
I paid a little more to get a more efficient motor. Ordered on a Saturday & delivered Tues. After some difficulty in removing the impeller from the shaft of the old motor (there is no good way to grasp the motor shaft and I gingerly used a pipe wrench to dislodge the impeller), installation was a snap following the instructions available on INYO's web site. I recommend purchasing the GO-KIT tune up package as the shaft seal showed wear after 8 years & the gaskets tend to dry out and stretch. The new motor was up and running quietly in about 2 hours start to finish.
Was this review helpful to you?