Part # SP-2610-C
Manufacturer Code SPX2610C
Dimensions 5" L x 5" W x 3" D
Impeller 1.5 THP - SPX2610C
The sp2610-c hayward part i have looks different on the gold side. Mine is black plastic with metal. Is this a replacement part that will fit?
Reply
If your impeller is marked sp2610-c then this impeller will work as its replacement.
Reply
What is the correct sealer for the sp-2610-c this impeller. I have the spx1600z2 sealer and it does not fit the same as the old one that broke.
Reply
Hi, S. This is the correct replacement Impeller. You may need to remove the stainless steel bushing from off of the old impeller. Check out Step 16 of our How To Replace a Pool Motor Shaft Seal guide.
Reply
I'm looking for an impeller for an A O smith ST1152 1 & 1/2 HP motor. I use to have a 1 hp motor, just upgraded ( the 1 hp motor and pump had the SP2607-C impeller). Thanks.
Reply
So these impeller versions are actually based on the model of the front pump housing that the motors attach to. You will need to provide the specific motor model, part or catalog number and the model of the pump housing so we can locate the correct impeller for you. If you are not sure of the pump housing model you can always send us an image at upload@inyopools.com so we can review and further advise.
Reply
