$86.42
I am rebuilding a wet end pump and also replacing the front bearing on the motor. what I need to know is the part numbers for the seal to fit volute with mfg. p/n 315-1160, o-ring for faceplate with mfg. p/n 311-2140, impeller,1hp full with mfg. p/n 310-4000 and a slinger part # 5030-12. The front bearing will be for model sd-10-1n11cb. The a.o. smith label is CAT BN25, PART 0-177894-24, TYPE SP, FRAME P 48 Y, HP SF PH 1, HZ 60, RPM3450, VOLT 115, AMPS 12.0. Also is the back bearing the same as
Reply
Hi, The Volute O-ring - 805-0556 and Shaft Seal - PSR 1000 will fit the housing and cover of the p/n provided. The BN25 motor bearings are the same on both ends.
Reply
