$592.94
Part # ECM27CU
Warranty 18 Months
V-Green™
Versatility and performance best describe A. O. Smith's new V-Green™ variable speed pump motor with integrated timer. Capable of delivering superior energy savings of over 80% versus a standard single-speed motor, V-Green motors are well suited for pump applications ranging from 3/4 - 2.7 total horsepower (THP). Spurred by consumer interest in energy-saving products and government-mandated efficiency standards, the innovative V-Green variable speed ECM offers premium efficiency boosted by such features as Power Factor Correction, which raises overall efficiency while reducing input amps! The state-of-art user interface ensures programming ease and flexibility, with on-screen navigation, ergonomic selector switch, and pre-set programs for out-of-the-box operation. A. O. Smith's V-Green is Title 20** compliant and with three user-defined variable speeds is a superb choice for reducing energy consumption, for lowering overall pool ownership costs, and for satisfying regulatory requirements.
Round Flange Hayward Super Pump, Super II Pump & Max-Flo Pumps
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
Variable Speed - PART # NPTT270
Don't Forget Your Tune Up Kit
Hayward Super Pump Tune Up Kit
Hayward Super II Tune Up Kit
Hayward Max-Flo Tune Up Kit
Jacuzzi Magnum Tune Up Kit
Motor Features
Note: This motor is NOT California Title 20 Compliant
What is the warranty on the AO Smith variable speed
Reply
Hi Harvey,The motor is warranted against defects in materials and workmanship for one year from the date of installation or twenty-four months from the date of manufacture, whichever comes first.Thank you,
Reply
We have a Hayward Super II Pump Model# K45N2N104 S/N 8B05, 2hp, 1.55KW, 230 volts, RPM 3450 56J Frame. Can I purchase a ECM27CU for this? It doesn't look like a fit for the round flange. I know it should be the right motor, but I just want to be sure before I purchase it. Can I return it if for some reason it doesn't fit?
Reply
Brad, This 2.7 HP Variable Speed Motor Round Flange P/N ECM27CU can replace your current motor. We also recomend getting a Tune Up Kit which consist of the replacement shaft seal, housing gasket, diffuser gasket and housing lid o-ring.
Reply
Will this fit a Hayward Northstar pump? Do you have a vs motor that would fit a Hayward Northstar?
Reply
No, unfortunately, there are no variable speed motors that we know of that will fit the Hayward Northstar pump. There is a dual-speed motor that will bolt up with that Northstar pump.
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
1 0
Replaced on a Hayward Super Pump which only runs 6 sheer descent waterfalls. The main pool has a super pump ii which motor still runs good. When I took apart 3 hp motor i noticed the company I used to remodel my pool had left 2 hp impeller, plate and diffuser. I changed to 2.5 impeller, diffuser and plate to take advantage to 2.7 hp. What a difference! Big improvement and quite. Glad i made the upgrade.
Less than 1 hr
Screwdriver, Pliers, Socket Set
3 0
Removed old pump (4 bolts)
replaced old shaft seal and O rings
installed new V-Green 2.7 HP Pump (4 bolts)
Reconnected the 220 Volts wiring (3 wires)
Reconnected the bonding wire
The entire process took less than 30 minutes
I am not a professional but this was really easy to do. Almost anyone can do it.
The Most Recent Reviews
(5 out of 5 stars) Good choice
Reviewed By: Inyo Customer ()
After some weeks of use I can’t be more happy with the equipment performance. I ordered overnight shipment but I received my pump 2 days ago after due to holidays - understandable - the package was received in perfect condition and I proceeded to aately then the Istallation was extremely easy. No much information was provided for an enthusiastic homeowner but was not a problem for me. I connect the power to a switch and salt system in 30 minutes. Program set up easy too.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easy to install, working great
Was this review helpful to you?
3 1
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Louder than I thought it would be but I can handle it. The variable speed is nice but I’m concerned at the lower speeds it won’t pull enough water but haven’t put it through a summer yet. I Bought it 6 months ago and the LCD display is no longer working. I’m requesting warranty service, hopefully they are ready to deal with.
Was this review helpful to you?
3 0
(5 out of 5 stars) Will only buy from INYO Pools
Reviewed By: Inyo Customer ()
Pump is very quiet. Saving me lots of money from day one. Customer service is the best. They kept in touch with me very thankful. Will only buy from INYOn pools now. Thank you for all your help.
Was this review helpful to you?
3 0
(3 out of 5 stars) Was Not Able to Just Replace the Faulty Motor
Reviewed By: Inyo Customer ()
The design concept of the variable speed pump is very good. The electronic controller is also good. However, the motor itself is of a very poor manufacturing quality. I bought one pump in 2015 and had to replace the entire motor and controller system recently because the permanent magnet on the motor is poorly manufactured. The rotor magnets are glued with a poor quality epoxy. The magnets were chipped and separated from the rotor then became lodged inside the stator. It was a pity, I was not able to just replace the faulty motor. INYOPOOL needs to address the quality issue.
Was this review helpful to you?
4 0
(3 out of 5 stars) It's Ok
Reviewed By: Inyo Customer ()
Didn't have this pump a full year and the LCD display went bad. Then I find out that you have to completely pull the motor off the pump and provide a picture of the face of the pump before they will do anything with the warranty. And that even if the motor is fine but the display is bad. The savings I'm getting from this pump is ok but it's not as much as a lot of the online videos boast. I haven't seen anything more than a 15% saving on my electric bill. Not happy about having to pull the motor to take a picture. Then put it back together to wait to see what they do with the warranty. You also have to buy another pump seal if the motor is replaced.
Was this review helpful to you?
1 1
(5 out of 5 stars) Perfect replacement for B129 AO Smith motor with Hayward Super II pump.
Reviewed By: Inyo Customer ()
Perfect fit to replace a worn out AO Smith B129 motor (Screaming bearings) with a Hayward Super II pump. Easy to change, powered right up. Love the variable speeds and how quiet the motor is when running at lower RPMs. This is my first experience with a variable speed motor so had to take time to understand all the options and features. Called Inyo Pools to confirm going with 2.7 HP over 1.65 ECM16CU since B129 is 1.5 HP but is actually 1.95 HP with 1.3 service factor.
Was this review helpful to you?
2 0
(5 out of 5 stars) Good investment,
Reviewed By: Inyo Customer ()
Easy to install with existing pump housing. Based on current schedule, the estimated power usage is around 23 dollars per month. Which is way lower then my old pump. It's also very quiet and easy to program using the controller.
Was this review helpful to you?
(5 out of 5 stars) Variable Speed Motor
Reviewed By: Inyo Customer ()
Easy to install and program! Much quieter than older motor and I see the cost savings on pool energy used!
Was this review helpful to you?
(5 out of 5 stars) a great choice for me to upgrade my Hayward super 2 pump motor
Reviewed By: Inyo Customer ()
Found this one while searching for a new pump----- this is a great solution for anyone with an older pump. I have a hayward super II. I had a 12 year old 2 1/2 hp 2 speed motor that was making noise, leaking and running very hot so it was time to change. I have been looking to upgrade to a VSP to save energy for a long time but they run about 1300 + installation I was planning to do it myself but if you saw the way my pump is plumbed..... it would take a lot of effort and about 3 valve changes (no room to cut pipe) at about $75 each to do it. I found the direct replacement motor ($440) and found this one - it is a drop in replacement motor for about any pump: you have to make sure to order the correct mount square or round but you leave the 'wet end' - the part with the pipes in place and just change out the motor part so it is the same as any other motor change. The up front cost was $200 more but according to the energy calculator I should save that pretty quickly- the draw on the other was 10.2 amps at 220v for a total of about 2400 watts on high (less on low speed) --- running at about 8 hours a day year round, over the years the new one will probably save me quite a bit because we all know electricity does not get cheaper. The challenge was figuring out how to put this in place of my 2 speed pump and would it work with my older controller?- a jandy all-button remote with outdoor power center. I researched for a while and found out that the answer is yes and no -- you cannot control the pump speed with my controller but you can control of and on so the pump speed and run times are controlled with the new pumps on board controller, I just set the indoor controller to 'on' and leave it alone and adjust the speed at the pump itself-- not all that big a deal because how often do you change it anyway? my other concern was freeze control as I live where it does freeze sometimes but that isn't a real big problem because the pump has its own (read the manual online) and even if the indoor controller gets turned off, it will turn on if the temp drops below 39 so that shoudn't be a problem. The other issue I had was the two speed relay in the power center- I left that in place but disconnected the power to it and its relay so the fourth wire (that gave power to the low speed side) is disconnected on both ends for safety. once I figured that out wiring was easy (AS ALWAYS MAKE SURE POWER IS OFF AT THE BREAKER BEFORE TOUCHING ANY OF THAT - COMMON SENSE BUT HEY, TO IMPORTANT NOT TO MENTION). i love that the wires are on top so it is very easy to connect and as soon as I got it all together and turned it on, it worked perfectly with no leaks. --- the perfect solution for energy savings without replacing the whole pump! Another small thing that is not mentioned in any of the instructions is there is a thick rubber piece that I could not figure out what it was for until after I put it all back together ---- it goes on the old pump base under the new motor to support it like a motor mount It was VERY hard to install after the fact so when you open it up and see that piece, look at the old motor frame under the pump and see if there is a place to stick it as the new motor is smaller than the old one and without this support, all the weight would be on the bolts attaching the motor to the pump part- probably not a big deal but I am OCD enough to have to put it in there -- believe me, it was not easy after the motor is installed but done now and no more annoying rattle from the pump so you do kinda need it. The new pump motor is much quieter than the old one but can't speak to energy cost yet as my first bill hasn't come but I expect it to me much lower. This is a great investment if you need a new pump motor but the pump par itself is in good shape so, good luck! Id defiantly consider this one, its a great idea and much cheaper than replacing the entire pump.
Was this review helpful to you?
(5 out of 5 stars) Great, Efficient pump
Reviewed By: Inyo Customer ()
Perfect replacement for my Hayward Super Pump II. Also controls my Polaris booster pump. Very quiet operation. Easy to program.
Was this review helpful to you?
(5 out of 5 stars) Easy Installation, Easy Set up, Great Pump!
Reviewed By: Casey D. from Maryville, TN ()
Pros: Energy saving, easy to install, works with my existing pump.
Cons: Prime feature is nice, but unnecessary if the pump is primed
Replaced my 2HP motor with this, and it has been running strong since. Great pump, and great that it has its own schedule. Only negative thing is the priming period at the beginning, have to have a minimum of 1 minute priming time. I wish there was a button to prime before going to the Run setting. Haven't had the pump long enough to see the energy savings on my bill, but just calculating the differences should definitely save a lot of money!
Was this review helpful to you?
5 0
(5 out of 5 stars) Great upgrade!
Reviewed By: Mike B. from Garrison, NY ()
Pros: Quiet, easy to install, energy efficient
Cons: More $ initially
Person I spoke to at INYO was incredibly helpful and knowledgable. Our Haywood pump died, and rather than simply replace it with another low-efficiency pump, we ended up getting this variable-speed pump motor instead. It was "plug and play" with the existing hardware, and was up and running quickly. It is a dramatically better and more efficient pump motor than the basic Haywood, and will likely pay for itself in energy savings in a season or 2.
Was this review helpful to you?