1. Home
  2. How To Guides
  3. Above Ground Pool Maintenance

Above Ground Pool Maintenance

WRITTEN BY: 

  3.58 out of 5 stars on 67 ratings
(Click on a star to add your rating)

Maintenance of above ground pools is not for the squeamish. There is a lot of responsibility that comes along with having a body of water in your backyard. But the benefits of cooling off in the summer, watching your kids have a blast and even having a little fun yourself make it all worthwhile. For clean, healthy and of course sparkling water, study up on the science of above ground pool maintenance.



Comments

Email

Print

Steps

Step by Step

Top

Step 1

The pump and filter form the heart of any above ground pool maintenance program, helping to keep your pool water clear. Pumps provide the force to circulate the water and push it through the filter. Ideally, you want to turn over all of the water in an above ground pool within an eight hour time period. This means that every drop of water has circulated through the filter within eight hours. The best time to run your pump is during the day, usually for 8 - 12 hours at a time. It is also important that the water circulates around the perimeter of your pool. Water in motion makes it harder for bacteria and algae to take hold and also directs more debris to your skimmer where it can be captured by your filter. Adjust the eyeball jets in your inlets to move your pool water in a circular motion.

Click Here to View the Pump and Filter Systems

Step 2

Your above ground pool filter is there to catch and remove both visible debris and microscopic particles. Sand and D.E. filters are cleaned by backwashing when the filter's pressure gauge indicates levels 8 to 10 lbs. above normal (always follow manufacturer instructions). Cartridge filters have a cartridge inside that can be removed and washed using a garden hose. Eventually, the cartridge will need to be replaced to ensure that the filter is working effectively.

Click Here to View the Pump and Filter Systems

Step 3

All above ground pools have areas with little or no circulation. These areas of minimal circulation are the breeding grounds for problems like algae growth. The walls and floor should be brushed and vacuumed once a week. Even if you use an automatic above ground pool cleaner, brushing once a week is a must.

Click Here to View Cleaning Accessories

Click Here to View the Automatic Pool Cleaners 
 

Step 4

Test your water regularly for two key factors: pH and sanitizers. By testing at least three times per week you will begin to understand how bather load, weather (rain and sun) and chemical application affect your pool water. Regular testing of pH and sanitizer levels will ensure crystal clear water all season long. A digital test strip reader will make this quicker and easier. It is vital that proper pH is maintained in your pool at all times. If the pH is outside 7.2 to 7.6 it will greatly reduce the effectiveness of pool chemicals. Test your pH level at least three (3) times a week and use either a pH Reducer or pH Increaser to bring the pH into the proper range. If you find it difficult to maintain your pH, check your total alkalinity and be sure it is in the ideal range. Adjust total alkalinity levels accordingly.

Click Here to View the Pool Water Test Kits

Step 5

Chlorine tablets are the most common and efficient sanitizer to use in above ground pools. These tablets are compressed so that they dissolve slowly and steadily release free chlorine into your water to wipe out bacteria and keep your water clean. Chlorine also comes in sticks and granules. Whichever form you decide to use, you’ll want to look for stabilized chlorine which is processed to protect it from the sun's damaging rays, making the chemical last longer and work more effectively. Always keep chlorine in your skimmer, floater, or automatic feeder for continuous sanitizing.

Click Here to View Chlorine Tablets

Step 6

As debris builds up in the water - from perspiration, suntan oil, hair spray and unfortunately, urine - it can cause eye and skin irritation and dull water. Often, chlorine is blamed for irritation and odor when in fact the real culprit is contaminants which tie up chlorine, keeping it from effectively sanitizing the water. When this happens, you should use shock which is basically a concentrated chemical treatment (usually chlorine). Shocking your above ground pool once a week will oxidize contaminants, freeing up the chlorine, and keeping your water crystal clear. Regular shock treatments will also kill resistant algae in the water. There are a variety of different products available including non-chlorine shock and shock designed for hard water areas.

Click Here to View our Pool Shock 
 

Step 7

Since algae are visible, it tends to be the pool problem that is most disturbing to pool owners. This is not surprising as no one wants to see black, green or yellow fuzz growing in their pool. In reality, it is not the algae that are harmful but the waste they produce by converting sunlight into food. This waste then feeds bacteria which is the real problem. Algae spores travel through the air and enter pool water. With just a few hours of sunlight on a warm day, algae can colonize your pool if your chlorine level is too low. The best way to combat algae is to never let them get started. Regularly checking to make sure your chemical levels are adequate and your pool water is balanced is vital. Adding algaecide is another preventative measure which will help prevent all types of algae from getting a foothold in your pool. You can use algaecide weekly to discourage algae growth.

Click Here to View our Algaecides 
 

Step 8

If algae have already taken hold in your pool, there are some basic steps to follow. First, shock your pool and keep your water circulating 24 hours a day if possible. You are looking to achieve 10 ppm of chlorine. After shocking, you will need to brush and vacuum the entire pool. Follow up with an algaecide designed for your particular algae problem (most common are black, green and mustard algae). Brush and vacuum again and try to repeat this everyday. Check chlorine and add more if it’s below 5 ppm. It is also recommended that you regularly clean your filter during this process.

Comments

Top
Add a Comment
(41 to 80 of 96)

InyoPools Product Specialist  Posted: 5/14/2017 

Samantha Morgan - Turn off the pump. Try stopping the water around the leaks by placing a piece of plastic over the holes on the inside of the pool. Dry the outside suction and release fittings. Then try applying a silicon glue around the threads of the fittings.
 Reply

InyoPools Product Specialist  Posted: 5/11/2017 

Cris - The tablets are designed to release chlorine continuously while you are swimming in your pool. Most people run their pumps 8 hours a day but that varies according to the size of your pump, the season, and the number of people normally swimming in the pool.
 Reply

 Posted: 5/11/2017 

I'm just wondering how long after can my kids jump back into pool after adding a chlorinating tablet? And do I have to have the filter pump running 24/7?
 Reply

 Posted: 5/10/2017 

On my adapter a & b on the outside of pool it is leaking like around the thread that the suction and release valves are . How can I fix that of water is in pool
 Reply

InyoPools Product Specialist  Posted: 2/27/2017 

JESSY - See our video on "How to Clean a Green Swimming Pool (Algae)". It written for in-ground pools but will work for above ground pools as well.
 Reply

 Posted: 2/27/2017 

HI WE DID NOT OPEN THE POOL LAST SUMMER 2016 THE WATER IS VERY DARK. CAN WE USE AND TREAT THIS WATER? OR DO WE NEED TO DRAIN OUT ALL THE WATER, AND FILL UP AGAIN WITH CLEAN WATER? PLEASE ADV THANK YOU
 Reply

InyoPools Product Specialist  Posted: 10/18/2016 

Jeana - Unfortunately, we are not set up to do pool maintenance. We only sell pool parts.
 Reply

 Posted: 10/18/2016 

Can I get a quote on cleaning an 18ft above ground pool e mail response please
 Reply

InyoPools Product Specialist  Posted: 9/16/2016 

woody - There is really no effective way of eliminating calcium from well water. Your best bet is to brush the vinyl liner at the water line every month.
 Reply

 Posted: 9/12/2016 

I am changing liner on above ground pool, and will be refilling with my well water. We have lots of minerals in the water. what do you recommend to treat the water when filling? (The old liner had white mineral deposits at water line.)
 Reply

InyoPools Product Specialist  Posted: 7/5/2016 

Dirty Again...Arrugh - If you had a lot of debris in your pool, you might have to backwash and rinse your filter 2 -3 times to get the debris out of the sand. If you haven't replaced your sand in 5 years, it might be time to replace it. Also, check the spider gasket in your multiport valve to make sure it is not damaged.
 Reply

 Posted: 7/1/2016 

I clean the pool, then backwash the sand filter until the water flowing out isn't dirty, then I rinse the sand in the filter, then I start the filtration cycle and within hours I have a dirty pool bottom again. It like I never cleaned it. There isn't a wind storm or nearby construction etc to cause this dirt. I believe all of the dirt is staying in the filter and not cleaning out with backwashing. Any ideas on why this is happening? Thank you in advance for your ideas.
 Reply

InyoPools Product Specialist  Posted: 6/27/2016 

Confused - Maintaining your pool's chemical balance is the key to keeping your pool clear. You must keep your chlorine level up. Have your pool store test your pool’s phosphate and stabilizer levels when he tests the basic chemicals. Stabilizer (CYA) keeps the sun from burning off the chlorine in the pool. A high phosphate level can reduce you chlorine level quickly. Once your pool has turned green, it takes extra effort to clear it up. See step 8 of this guide.
 Reply

Anonymous  Posted: 6/25/2016 

I'm so confused.
Our pool will be super clear and over night it turns green.
I have visited our nearest pool store so much they know me by first name.
I have so many kiddos here during the summer that I'm so frustrated.
 Reply

InyoPools Product Specialist  Posted: 6/6/2016 

Chlorine – If you have a small AB pool, you might want to use one or two Floaters to distribute your chlorine around the pool. You can use liquid chlorine, but it’s a hassle to keep adding it to the pool. If your pool is larger, you might consider a regular chlorinator. See our guide on “ How to Use a Pool Chlorinator”.
 Reply

Anonymous  Posted: 6/5/2016 

We just got a sand filter for our agp, but I'm unsure where and what kind of chlorine to use with it. I bought 1" tablets and liquid chlorine. ANY HELP?
 Reply

InyoPools Product Specialist  Posted: 10/19/2015 

KeyMas - Before you add any chemicals, test you pool water. Use strips or better yet if you have a pool store near you, have them test your water - usually free. Your hardness measurement should be between 200 and 400. If your hardness is less than 500, you can compensate for this by keeping your pH on the low side 7.2 to 7.5. If your hardness is above 500, you should drain a portion of your pool water and replace it with softer water. Options - get a water softener, bring in soft water with a truck service, or hook up a system to collect rain water for your pool.
 Reply

 Posted: 10/15/2015 

Hi! Just finished filling up mu above ground pool with well water and will begin running the pump and blancing it. Is there anything I need to do before putting chemicals in since it's well water?
 Reply

InyoPools Product Specialist  Posted: 7/1/2015 

mom of 4 - See the second review by Papa Goose on this product link to "Rust & Scale (Metal Control) 1 Qt.". He appeared to have the same situation you have.
 Reply

 Posted: 6/30/2015 

We just set up our above ground pool for the summer we have well water and have a very orange colored pool. This is the first year that it has been orange. How di i get rid of it without draining and restarting?
 Reply

InyoPools Product Specialist  Posted: 6/23/2015 

Helpme - Keep your pump on 24 hrs for a couple more days. Make sure your chemicals are balanced. Take a water sample to a local pool store and have it tested. Ask for them to test for phosphate also. If that doesn't help clear the water, try Floc N Vac.
 Reply

 Posted: 6/22/2015 

My above ground pool eas fine then 2 dayd ago i put all 4 treatments and now the water is cloufy cant see the bottom of the pool and is only 4' deep bit when u touch the water is clear on the top what should i do to bring it back to normal.help
 Reply

InyoPools Product Specialist  Posted: 6/16/2015 

pool cover - Algae thrives in hot water. The hotter the water, the greater the algae and therefore the need for greater amounts of chlorine. Since the purpose of a cover is to raise the pool's water temperature, it would follow that it would also promote algae growth.
 Reply

InyoPools Product Specialist  Posted: 6/16/2015 

Need help - If you have had your pool for a while, you may have something called chlorine lock. See our guide on "How To Break Chlorine Lock" to determine if you have chlorine lock and how to correct it.
 Reply

 Posted: 6/15/2015 

Does the presence or absence of a cover on an above ground pool have any impact on the development of algae in the pool?
 Reply

 Posted: 6/15/2015 

I have high chlorine levels still have a week and lots of rain. I also have low PH levels and have treated it to bring up levels. Don't know what else to do.
 Reply

InyoPools Product Specialist  Posted: 6/14/2015 

Jo - You should have some kind of shut off valve like the one shown in step six of this guide, "How To Upgrade an Intex Pool Pump and Filter System".
 Reply

 Posted: 6/12/2015 

How do I stop the flow of water while I service the pump?
 Reply

InyoPools Product Specialist  Posted: 6/2/2015 

Liz - If your pH is that low, I would guess that some of your other chemicals are also out of range. Once you get the chemical balanced, your cloudy water should clear up. If you can, have a local pool store check the chemical levels in your water to establish an accurate baseline. Then see our guide on "How To Maintain A Swimming Pool Part 3 (Adjusting Chemicals)".
 Reply

 Posted: 6/2/2015 

I got rid of the green but now the water is cloudy. I checked pH and it is 6.8. What should I do to get the water clear again?
 Reply

InyoPools Product Specialist  Posted: 6/1/2015 

Ken - Normal run time is 8 hours, but if your pool is clear at 4 hours, I'd stay with that. As the days get hotter during the summer, you may have to increase it to get ahead of the algae.
 Reply

 Posted: 5/31/2015 

Hello,
I have a 15' above ground pool (4' deep) and I want to know the correct amount of time I should let my filter run. I have a cartridge filter and usually let it run 4 hours a day. This always works and I never have problems but should I run it longer?
 Reply

InyoPools Product Specialist  Posted: 5/30/2015 

Frustrated - Make sure all of your chemical are within acceptable ranges, starting with chlorine. With all the debris that was in your pool, you may have to shock it again. See our guides in the in pool maintenance section "Pool Maintenance". Read the four part series on chemicals. There are also guides on "How To Go From Cloudy To A Crystal Clear Pool" and "How To Remove Calcium Scale Deposits From Your Pool Wall" which can lead to cloudy water. Although these guides are written for in-ground pools, they are also applicable to AG pools.
 Reply

 Posted: 5/26/2015 

Hello! We did not use a cover on our above ground pool last winter. It was like a pond and we added algaecide to clear it up. The green faded to cloudy. When we scooped the leaves out of the pool, it stirred up the brown debris from the bottom of the pool. We repeated the shock/algaecide treatment and swept the debris out of the pool and not through the cartridge filter. Over the weekend I added floc to the pool and turned it off a few hours later as instructed. I swept it the following day with little result and the pool is still cloudy. When we have the pool water tested, it reads no chlorine, even though we add shock and have chlorine tablets floating around in the pool. Also, the walls of the pool feel gritty, which I am told has something to do with calcium. I'm beyond frustrated already! Please help! What should we focus on first? Cloudiness? No Chlorine read? Low stabilizer? Any help is appreciated!
 Reply

InyoPools Product Specialist  Posted: 2/9/2015 

Empty pool – From your question I am assuming that you have an in-ground pool. Your biggest risk in leaving your pool empty for the summer is having it heave up out of the ground or crack from the upward pressure. If you live in an area with a high water table or have a heavy rain that saturates the ground, the pressure from that water will tend to push up on your pool shell. Without the weight of the water in the pool that pressure may damage your pool.
 Reply

Anonymous  Posted: 2/7/2015 

Can you leave a pool with no water in It for the summer? Will it affect the rock in the bottom?.
 Reply

InyoPools Product Specialist  Posted: 7/8/2014 

sueann71 - Make sure all of your pool chemicals are balanced before you shock you pool, especially the pH. After shocking, use an Algaecide.
 Reply

 Posted: 7/6/2014 

I poured one bag of shock and changed my filter and its been 14 hours and my pools still green? Can anyone help me with this?
 Reply

InyoPools Product Specialist  Posted: 7/5/2014 

dedicated mother - Here's a link to some more suggestions on cleaning cloudy water: How To Go From Cloudy To A Crystal Clear Pool.
 Reply

 Posted: 7/4/2014 

I have well water. I know I have to treat my pool with metal begone before adding chlorine. I added 32oz of metal balance to my pool as it filled ( 5312 gallons) let it filter all night. The next night I added one gallon of liquid chlorine again ran all night. Next more the water was slightly cloudy but could still see the bottom and it was tinted greenish yellow. How do I get it back clear without spending a butt load or draining?
 Reply